Title Publication Citation Year
Printed, Metallic Thermoelectric Generators Integrated with Pipe Insulation for Powering Wireless Sensors Brian Iezzi, Krishnamraju Ankireddy, Jack Twiddy, Mark D. Losego, Jesse S. Jur “Printed, Metallic Thermoelectric Generators Integrated with Pipe Insulation for Powering Wireless Sensors”  Applied Energy (accepted 2017). 2017
Thread-Like CMOS Logic Circuits Enabled by Reel-Processed Single-Walled Carbon Nanotube Transistors via Selective Doping Jae Song Heo, Taehoon Kim, Seok-Gyu Ban, Daesik Kim, Jun Ho Lee, Jesse S. Jur, Myung-Gil Kim, Yong-Hoon Kim, Yongtaek Hong, and Sung Kyu Park “Thread-Like CMOS Logic Circuits Enabled by Reel-Processed Single-Walled Carbon Nanotube Transistors via Selective Doping” Advanced Materials 29 (31) 1701822 (2017). 2017
Human and environmental analysis of wearable thermal energy harvesting Amanda C. Myers, Ryan Hodges and Jesse S. Jur “Human and environmental analysis of wearable thermal energy harvesting” Energy Conversion and Management 143 218-226 (2017). 2017
Effect of isolation method on reinforcing capability of recycled cotton nanomaterials in thermoplastic polymers Nasim Farahbakhsh, Peiman Shahbeigi, Hasan Sadeghifar, Richard A. Venditti, and Jesse S. Jur “Effect of isolation method on reinforcing capability of recycled cotton nanomaterials in thermoplastic polymers” Journal of Materials Science 52 (9) 4997-5013 (2017). 2017
Strong and resilient alumina nanotube and CNT/alumina hybrid foams with tuneable elastic properties Kelly L. Stano, Shaghayegh Faraji, Ozkan Yildiz, Halil I. Akyildiz, Philip D. Bradford and Jesse S. Jur “Strong and resilient alumina nanotube and CNT/alumina hybrid foams with tuneable elastic properties” RSC Advances 7 (45) 27923-27931 (2017). 2017
Cellulose-Lignin Biodegradable and Flexible UV Protection Film Hasan Sadeghifar, Richard A. Venditti, Jesse S. Jur, Russell E. Gorga, and Joel J. Pawlak “Cellulose-Lignin Biodegradable and Flexible UV Protection Film” ACS Sustainable Chemistry and Materials 5 (1) 525-631 (2017) 2017
Printed Stretchable Interconnects for Smart Garments: Design, Fabrication and Characterization Murat A. Yokus, Rachel F. Foote, Jesse S. Jur, “Printed Stretchable Interconnects for Smart Garments: Design, Fabrication and Characterization” IEEE Sensors 16 (22) 7967-7976 (2016). 2016
Evaluating Electrical Conductivity, Thermal Behavior, and Seebeck Coefficients of Conductive Films for Printed Thermoelectric Energy Harvesting Systems Krishnamraju Ankireddy, Akanksha K. Menon, Brian C. Iezzi, Shannon K. Yee, Mark D. Losego, and Jesse S. Jur “Evaluating Electrical Conductivity, Thermal Behavior, and Seebeck Coefficients of Conductive Films for Printed Thermoelectric Energy Harvesting Systems” Journal of Electronic Materials (accepted, 2016). 2016
Engineering Imagination with Ideation Rebecca Hite, Jesse S. Jur, and Gail Jones “Engineering Imagination with Ideation” Journal of Interdisciplinary Teacher Leadership 1 (1) (2016). 2016
Ultralight Interconnected Metal Oxide Nanotube Networks Kelly L. Stano, Shaghayegh Faraji, Ryan Hodges, Ozkan Yildiz, Brian Wells, Halil I. Akyildiz, Junjie Zhao, Jesse S. Jur and Philip D. Bradford, “Ultralight Interconnected Metal Oxide Nanotube Networks” Small 12 (18) 2432–2438 (2016). 2016
Photoluminescence Mechanism and Photocatalytic Activity of Organic–Inorganic Hybrid Materials Formed by Sequential Vapor Infiltration Halil I. Akyildiz, Kelly L. Stano, Adam T. Roberts, Henry O. Everitt, and Jesse S. Jur, “Photoluminescence Mechanism and Photocatalytic Activity of Organic–Inorganic Hybrid Materials Formed by Sequential Vapor Infiltration” Langmuir 32 (17) 4289–4296 (2016). 2016
Silver decorated polymer supported semiconductor thin films by UV aided metalized laser printing Jonathan C. Halbur, Richard P. Padbury and Jesse S. Jur, “Silver decorated polymer supported semiconductor thin films by UV aided metalized laser printing” Journal Vacuum Science & Technolology A 34, 031402 (2016). 2016
Printed Dry Electrodes for Body Surface Biopotential Recording Murat A. Yokus and Jesse S. Jur “Printed Dry Electrodes for Body Surface Biopotential Recording” IEEE Transactions on Biomedical Engineering 63 (2) 423-430 (2016). 2016
Flexible Technologies for Self-Powered Wearable Health and Environmental Sensing Veena Misra, Alper Bozkurt, Benton Calhoun, Thomas Jackson, Jesse S. Jur, John Lach, Bongmook Lee, John Muth, Omer Oralkan, Mehmet Ozturk, Susan Trolier-McKinstry, Daryoosh Vashaee, David Wentzloff, and Yong Zhu “Flexible Technologies for Self-Powered Wearable Health and Environmental Sensing” Proceedings of the IEEE 103(4) 665-681 (2015). 2015
Melt Extrusion of Polyethylene Nanocomposites Reinforced with Nanofibrillated Cellulose from Cotton and Wood Sources Nasim Farahbakhsh, Peiman Shahbeigi, Ali S. Ayoub, Richard A. Venditti, and Jesse S. Jur “Melt Extrusion of Polyethylene Nanocomposites Reinforced with Nanofibrillated Cellulose from Cotton and Wood Sources” Journal of Applied Polymer Science 132 (17) 41857 (2015). 2015
Organometallic exposure dependence on organic-inorganic hybrid material formation in polyethylene terephthalate and polyamide 6 polymer fibers Halil I. Akyildiz and Jesse S. Jur “Organometallic exposure dependence on organic-inorganic hybrid material formation in polyethylene terephthalate and polyamide 6 polymer fibers” Journal of Vacuum Science & Technology A, Vacuum, Surfaces, and Films 33 (2) 020604 (2015). 2015
Depth Profiling Trimethylaluminum-Modified PET Fibers by Nanoscale Infrared Spectroscopy Curtis Marcott, Michael Lo, Eoghan Dillon, Halil Akyildiz, and Jesse S. Jur “Depth Profiling Trimethylaluminum-Modified PET Fibers by Nanoscale Infrared Spectroscopy” American Laboratory 47 (2) 12-14 (2015). 2015
High performance carbon nanotube – polymer nanofiber hybrid fabrics Ozkan Yildiz, Kelly L Stano, Shaghayegh Faraji, Corinne Stone, Colin Willis, Xiangwu Zhang, Jesse S. Jur, and Philip D. Bradford “High performance carbon nanotube – polymer nanofiber hybrid fabrics” Nanoscale 7 (40) 16744-16754 (2015) 2015
Atmospheric Pressure Synthesis of Photoluminescent Hybrid Materials by Sequential Organometallic Vapor Infiltration into Polyethylene terephthalate Fibers Halil I. Akyildiz, Moataz Bellah M. Mousa, and Jesse S. Jur  “Atmospheric Pressure Synthesis of Photoluminescent Hybrid Materials by Sequential Organometallic Vapor Infiltration into Polyethylene terephthalate Fibers” Journal of Applied Physics 117 (4) 045301 (2015). 2015
Thermal Stability of Gold Nanoparticles Embedded within Metal Oxide Frameworks  Fabricated by Facile Vapor Phase Modifications onto Textiles Richard P. Padbury, Jonathan C. Halbur, Peter J. Krommenhoek, Joseph B. Tracy, Jesse S. Jur “Thermal Stability of Gold Nanoparticles Embedded within Metal Oxide Frameworks  Fabricated by Facile Vapor Phase Modifications onto Textiles”  Langmuir 31 (3) 1135-1141 (2015). 2015
Systematic study of trimethyl aluminum infiltration in polyethylene terephthalate and its effect on the mechanical properties of polyethylene terephthalate fibers Richard P. Padbury and Jesse S. Jur “Systematic study of trimethyl aluminum infiltration in polyethylene terephthalate and its effect on the mechanical properties of polyethylene terephthalate fibers” Journal of Vacuum Science & Technology A, Vacuum, Surfaces, and Films 3 (1) 01A112 (2015). 2015
Melt Extrusion of Polyethylene Nanocomposites Reinforced with Nanofibrillated Cellulose from Cotton and Wood Sources Nasim Farahbakhsh, Peiman Shahbeigi, Ali S. Ayoub, Richard A. Venditti, and Jesse S. Jur “Melt Extrusion of Polyethylene Nanocomposites Reinforced with Nanofibrillated Cellulose from Cotton and Wood Sources” Journal of Applied Polymer Science APP-2014-07-2674.R2 (2015). 2015
Formation of novel photoluminescent hybrid materials by sequential vapor infiltration into polyethylene terephthalate fibers Halil I Akyildiz, Michael Lo, Eric Dillon, Adam T. Roberts, Henry O. Everitt, Jesse S. Jur “Formation of novel photoluminescent hybrid materials by sequential vapor infiltration into polyethylene terephthalate fibers” Journal of Materials Research 29 (23) 2817-2826 (2014). 2014
Tuning electrochemical performance of Si-based anodes for lithium-ion batteries by employing atomic layer deposition alumina coating Ying Li, Yujie J. Sun, Gunajie J. Xu, Yao Lu, Shu Zhang, Leigang G. Xue, Jesse S. Jur, and Xiangwu Zhang “Tuning electrochemical performance of Si-based anodes for lithium-ion batteries by employing atomic layer deposition alumina coating” Journal of Materials Chemistry A 2(29) 11417-11425 (2014). 2014
Temperature-dependent infiltration of polymers during sequential exposures to trimethylaluminum Richard P. Padbury and Jesse S. Jur “Temperature-dependent infiltration of polymers during sequential exposures to trimethylaluminum” Langmuir 30(30) 9228-9238 (2014). 2014
Mechanical and thermal investigation of thermoplastic nanocomposite films fabricated using micro- and nano-sized fillers from recycled cotton T-shirts Nasim Farahbakhsh, Richard A. Venditti, and Jesse S. Jur “Mechanical and thermal investigation of thermoplastic nanocomposite films fabricated using micro- and nano-sized fillers from recycled cotton T-shirts” Cellulose 21(4) 2743-2755 (2014). 2014
Effect of polymer microstructure on the nucleation behavior of alumina via atomic layer deposition Richard P. Padbury and Jesse S. Jur “Effect of polymer microstructure on the nucleation behavior of alumina via atomic layer deposition” Journal of Physical Chemistry C 118(32) 18805-18813 (2014). 2014
Conformal atomic layer deposition of alumina on millimeter tall, vertically-aligned carbon nanotube arrays Kelly L Stano, Michael Carroll, Richard Padbury, Marian McCord, Jesse S. Jur, and Philip D. Bradford “Conformal atomic layer deposition of alumina on millimeter tall, vertically-aligned carbon nanotube arrays” ACS Applied Materials & Interfaces 6(21) 19135-19143 (2014). 2014
Comparison of precursor infiltration into polymer thin films via atomic layer deposition and sequential vapor infiltration using in-situ quartz crystal microgravimetry. Richard P. Padbury and Jesse S. Jur “Comparison of precursor infiltration into polymer thin films via atomic layer deposition and sequential vapor infiltration using in-situ quartz crystal microgravimetry.” Journal of Vacuum Science & Technology A, Vacuum, Surfaces, and Films 32(4) (2014). 2014
Mechanisms and Reactions During Atomic Layer Deposition on Polymers Gregory N. Parsons, Sarah E. Atanasov, Erinn C. Dandley, Christina K. Devine, Bo Gong, Jesse S. Jur, Kyoungmi Lee, Christopher J. Oldham, Qing Peng, Joseph C. Spagnola, and Philip S. Williams “Mechanisms and Reactions During Atomic Layer Deposition on Polymers” Coordination Chemistry Reviews 257 (23-24) 3323-3331 (2013). 2013
Influence of Subsurface Hybrid Material Growth on the Mechanical Properties of Atomic Layer Deposited Thin Films on Polymers Yujie Sun, Richard P. Padbury, Halil I. Akyildiz, Matthew P. Goertz, Jeremy A. Palmer and Jesse S. Jur “Influence of Subsurface Hybrid Material Growth on the Mechanical Properties of Atomic Layer Deposited Thin Films on Polymers” Chemical Vapor Deposition 19(4-6) 134-141  (2013). 2013
Induced Wetting of Polytetrafluoroethylene by Atomic-Layer Deposition for Application of Aqueous-based Nanoparticle Inks Jonathan C. Halbur, Richard P. Padbury, and Jesse S. Jur “Induced Wetting of Polytetrafluoroethylene by Atomic-Layer Deposition for Application of Aqueous-based Nanoparticle Inks” Materials Letters 101 25-28 (2013). 2013
Nanoscale ceramic surface modification of textiles by atomic layer deposition Jesse S. Jur and Gregory N. Parsons “Nanoscale ceramic surface modification of textiles by atomic layer deposition”  American Ceramic Society Bulletin 91(6) 24-28 (2012). 2012
Temperature and Exposure Dependence of Hybrid Organic-Inorganic Layer Formation by Sequential Vapor Infiltration into Polymer Fibers Halil I. Akyildiz, Richard D. Padbury, Gregory N. Parsons, and Jesse S. Jur, “Temperature and Exposure Dependence of Hybrid Organic-Inorganic Layer Formation by Sequential Vapor Infiltration into Polymer Fibers” Langmuir 28 (44) 15697-704 (2012). 2012
 Atomic Layer Deposition of Conductive Coatings on Cotton, Paper, and Synthetic Fibers: Conductivity Analysis and Functional Chemical Sensing using ‘All-Fiber’ Capacitors Jesse S. Jur, William J. Sweet III, Christopher J. Oldham and Gregory N. Parsons “Atomic Layer Deposition of Conductive Coatings on Cotton, Paper, and Synthetic Fibers: Conductivity Analysis and Functional Chemical Sensing using ‘All-Fiber’ Capacitors”, Advanced Functional Materials, 21 (11) 1993-2002 (2011).  2011