Program

Tuesday, May 26
Time Event Location
10:30 a.m. Registration Opens College of Textiles (CoT)
11:30 p.m. Buffet Lunch CoT
12:30-3:25 p.m. Plenary Session 1 CoT
12:30-12:45 p.m. Welcome
Dr. David Hinks, Interim Dean, College of Textiles, NC State University, USA
CoT
12:45-1:25 p.m. 55 Years of Involvement with 3D Fabrics and Composites
Professor John Hearle, TexEng Software, Ltd, Manchester, UK
CoT
1:25-2:05 p.m. Engineering Design and Manufacturing of 3D Shell Fabrics for Industrial and Automotive Applications
Prof. Dr.-Ing. Alexander Buesgen, Hochschule Niederrhein, Germany
CoT
2:05-2:45 p.m. Acoustic emission cluster analysis for 3D orthogonal woven composites
Stepan Lomov, KU Leuven, Belgium
CoT
2:45-3:25 p.m. Challenges and Opportunities in Technical Textiles, Composites, and 3D Structures
Professor A. Blanton Godfrey, North Carolina State University, USA
CoT
3:25-3:45 p.m. Break CoT
3:45-6:25 p.m. Plenary Session 2 CoT
3:45-4:25 p.m. Designing with Polymer Composites: Achievements and New Challenges
Professor Constantinos Soutis, Director, Aerospace Research Institute, University of Manchester, UK
CoT
4:25-5:05 p.m. Opportunities for the Developers of 3D Woven Fabrics and Their Composites: Innovation in Weaving Shedding Systems
Professor Abdel-Fattah Seyam, NC State University, USA
CoT
5:05-5:45 p.m. 3D Warp Interlock Fabric Structure as a Solution of Composite Joining with Metallic Parts
Francois Boussu, ENSAIT, Roubaix, France
CoT
5:45-6:25 p.m. A new opportunity for 3D fabrics and 3D textile composites: E-Textiles
Amir Islam, Bally Ribbon Mills, Pennsylvania, USA
CoT
6:25 p.m. Day 1 Close CoT
6:30-8:00 p.m. Welcome reception and poster session, joint with TEXCOMP-12 CoT
List of Posters
Synthesis of Photo Polymer for Screen Printing Application
Abd El-Moniem Mahmoud, SPI, Egypt
Elaboration Technological Parameters Mixed Yarn
Bekzod, Tashkent Institute of Textile and Light Industry, Uzbekistan
Antimicrobial Carboxymethyl Chitosan/Poly Vinyl Alcohol Nanofibers Containing Silver Nanoparticles
Enas M. Reda and Hassan M. Ibrahim, Helwan University, Egypt
Technology for Producing Cotton- Silk Yarn
Gulnoz, Tashkent Institute of Textile and Light Industry, Uzbekistan
Impregnation of Silver Nanoparticles Into Bacterial Cellulose: Green Synthesis and Cytotoxicity
Hassan M. Ibrahim, Helwan University, Egypt
3D Orthogonal Woven Preforms Made from High Performance and Sustainable Fibers Extracted from Date Palm Leaves (DPL)
Mohamad Midani, NC State University, USA
Preparation, Characterization and Median Lethal Dose (LD50) Off Water Soluble Chitosan as Target Drug Delivery
Rehab M. Mosaad, Ain Shams University, Egypt
Model and Analysis of Three Dimensional Orthogonal Woven Fabrics with Finite Element Method
Mehmet Korkmaz, The University of Dokuz Eylül, Turkey
Wednesday, May 27
Time Event Location
9:00-10:15 a.m. Poster Session with tea and coffee CoT
10:20-1:00 a.m. Plenary Session 3 CoT
10:20-11:00 a.m. Guideline for the Product, Process and Production Chain Design of 3D Textiles
Dr.-Ing. Thomas Gries and Benedikt Wendland RWTH Aachen University, Germany
CoT
11:00-11:40 a.m. Ballistic Performance of 2D Textile Laminates and 3D Textile Constructions
Dr. Xiaogang Chen, The University of Manchester and TexEng Software Ltd, UK
CoT
11:40-12:20 p.m. 3D fabrics for composites: limitless opportunities; limited processes
Fredrik Winberg and Professor Nandan Khokar, Biteam AB, Sweden
CoT
12:20-1:00 p.m. Mechanics of 3D Woven Spacer Fabrics Using FEM and Mathematical Modeling
Dr. B.K. Behera, Indian Institute of Technology Delhi, India
CoT
1:00 p.m. Lunch CoT

Parallel Sessions

2:00-4:10 p.m. Session 1A: Applications Session 1B: Modelling Session 1C: Warp Knits and Spacer Fabrics
2:00 p.m. Chamois Padding for Cycling and Triathlon with Enhanced Healthcare and Wellbeing Professor Subhash Anand, University of Bolton, UK Generalized Geometric Modeling of 3D Orthogonal Woven Preforms from Flat Filament Yarns: The Influence of Weave and Number of Layers on Preforms Physical Properties Mehmet Ince, Gaziantep University, Turkey 3D Modelling of Jacquard Double Needle Bed Warp Knitted Structures Yordan Kyosev and Wilfried Renkens, Hochscule Niederrhein, Germany
2:40 p.m. Application of 3D Multilayer Woven Fabric as Electric Pressure Switch Khubab Shaker, National Textile University, Faisalabad, Pakistan Modeling and Simulation of Earthquake Resistant 3D Woven Textile Structural Concrete Composites Rajesh Mishra, Technical University of Liberec, Czech Republic Thermo-acoustic Properties of 3D Warp Knitted Spacer fabrics Arumugam Veerakumar, Technical University of Liberec, Czech Republic
3:10 p.m. Effect of Fabric Properties on Yarn Pulling Force for Stab Resistant Body Armor Magdi El Messiry, Alexandria University, Egypt Meso-finite Element Modelling of 3D Fabrics Using Embedded Element Method Ahmad Tabatabaei, KU Leuven, Belgium Static and Dynamic Compressional Properties of Three-Dimensional Weft Knitted Spacer Fabrics Used in Knee Braces Hemdan Abou-Taleb, Mansoura University, Egypt
3:40 p.m. Protection of Tendons of Super Pressure Balloon Against Ultra-Violet and Visible Light Rahul Vallabh, NC State University, USA The Effect of Fabric Architecture on Resin Infusion Performance and Void Content of Composites from 3D Orthogonal Woven Preforms Mehmet Ince, Gaziantep University, Turkey Modeling of 3D Woven Spacer Fabric with Innovative Cell Shapes and Multiple Layers Ghanshyam Neje & B.K. Behera, Indian Institute of Technology Delhi, India
4:10 p.m. Break CoT

Parallel Sessions

4:30-6:40 p.m. Session 2A: Monitoring and Mechanical Properties of Composites
Session 2B: Machines/Process/Design Session 2C: Composites
4:30 p.m. Deformability Of Biaxial And Triaxial Braided Reinforcements Boris Duchamp, ENSAIT, Lyon, France 3D Fibre Preforming with Robotics Professor Prasad Potluri, Northern Composite Centre, University of Manchester, UK Hyperelastic Constitutive Equation for Large Deformation of 3D Textile Composite Reinforcements Professor Philippe Boisse, INSA, Lyon, France
4:55 p.m. The Response of Polymer Optical Fiber (POF) to Bending and Axial Tension for the Application of Automotive Seat Occupancy Sensing Derya Haroglu, Erciyes University, Turkey 3D Textiles: Efficient Process for the Design and the Manufacturing for Dry Fiber Preforms Jonathan Levesque, CTT Group, Canada Manufacturing of Circular Cross-Section Composite Tubes Using Filament Winding Technique Hemdan Abou-Taleb, Mansoura University, Egypt
5:20 p.m. Investigation of Compressive Properties of 3D Reinforced Polymeric Composites Through Combined End & Shear Loading Syed Shah, NUST, Islamabad, Pakistan Innovation for 3D Textiles Structures: Woven Terahedron and 3G Volume Stiffeners      Xavier Legrand and Damien Soulat, ENSAIT, Lyon, France Non-Crimp 3D Fabrics with a Local Scaleable Drapability for Complex Shaped Composites Benjamin Schneider, Technische Universität, Dresden, Germany
5:45 p.m. Evaluation of Structural Health Monitoring System Using Embedded POF in 3D Orthogonal Woven Reinforcement Composite Tamer Hamouda, National Research Center, Egypt & Abdel-Fattah M. Seyam North Carolina State University, USA Technical Design of 3D Woven Fabrics on Multi-Rapier Weaving Machines Yanxue Ma, Donghua University, China Development of Novel 3D Reinforced Composites for Advanced Materials Huseyin Avci, Eskisehir Osmangazi University, Turkey
6:10 p.m.  Technology Intervention in Surface Modification Through Mix Media Techniques within Fashion and Lifestyle Industry Anupam Bhatia, Symbiosis Institute of Design, India Design of Advanced Green 3D Fiber Reinforced Composite Structures Macid Nurbas, Eskisehir Osmangazi University, Turkey
7:30-10:00 p.m. Conference dinner TBD
Thursday, May 28
Time Event Location
8:30 a.m.-10:30 a.m. Plenary 4: Integral Knits CoT
8:30 a.m. Engineered Integral Knitting Lisa Parrillo Chapman, North Carolina State University, USA CoT
9:10 a.m.
3D Knitting as a 21st Century Manufacturing Platform                                                                   
Genevieve Dion, Director, Shima Seiki Haute Technology Laboratory, Drexel University, USA
CoT
9:50 a.m. 3D Shaping for Knit Garment Fit                        Yanxue Ma, Donghua University, China and Traci Lamar, North Carolina State University, USA CoT
10:30 a.m. Break CoT

Parallel Sessions

11:00-1:00 p.m. Session 3A: Monitoring and Testing Session 3B: Medical Session 3C: Other Topics
11:00 a.m. Coloration Process for Integral Knitting Lisa Parrillo Chapman, North Carolina State University, USA Warp Knitted Spacer Fabrics as a Novel Scaffold for Dermal-Epidermal Skin Replacements Tim Bolle, Yves Gloy RWTH, Aachen, Germany Shape and Surface: The Challenges and Advantages of 3D Techniques in Innovative Fashion, Knitwear and Product Design Ellen Bendt, Niederrhein University of Applied Siences, Germany
11:30 a.m. Customized 3-D Whole Garment Knitting With Precise Fitting For Athletes: Using A Combination Of Whole Garment Technology And 3-D Body Scanning Andre J West, North Carolina State University, USA Comfort Properties of Terry Undergarment Fabrics Fatma Kalaoglu, Istanbul Technical University, Turkey Improved Definition of 3D Warp Interlock Fabric Francois Boussu, ENSAIT, Roubaix. France
12:00 p.m. Complex 3D Shaped Flat Knitting Preforms For Composite Applications Tamer Hamouda, National Research Center, Egypt Facilitating Users Participating in 3D Smart Textile Development for Healthcare Applications Siw Eriksson, University of Borås, Sweden Pore Channel Tortuosity in 3D Nonwoven Structures Rahul Vallabh, North Carolina State University, USA
12:30 p.m. Predicting the Appearance of 3D Garment for e- Marketing Professor Sherwet H El Gholmy, Alexandria University, Egypt Novel 3D Warp Knit for Tissue Engineering Applications. Ting He, North Carolina State University, USA
Close of conference
Shima Seiki Integral Knitting Workshop
Thursday, May 28
Time Topic Instructor
12:30 p.m. Lunch
1:30 p.m. Overview and Introduction Lisa Chapman, NC State University
1:45 p.m. State of the Art in Integral Knitting Sam Ming, Shima Seiki USA
Lisa Chapman, NC State University
Genevieve Dion, Drexel University
3:00 p.m. Break
3:15 p.m. Yarns for Integral Knitting Matthew Kolmes and Bill Bowling, Supreme Corporation
4:15 p.m. Laboratory Demonstrations: Integral Knitting Equipment Brian Davis, NC State University
5:30 p.m. Question and Answer Session
Shima Seiki Integral Knitting Workshop
Friday, May 29
Time Topic Instructor
8:15 a.m. Day 2 Introduction Lisa Chapman, NC State University
8:30 a.m. Fibers and Yarns for Integral Knitting Vijay D. Amirtharaj, Premiere Fibers
9:30 a.m. Yarns/Fabric/Product Simulation Emily Hung, Shima Seiki, USA
Lisa Chapman, NC State University
10:30 a.m. Break
10:45 a.m. Knit Spacer Fabrics Genevieve Dion, Drexel University
Emily Hung, Shima Seiki, USA
Sam Ming, Shima Seiki USA
12:30 p.m. Question and Answer Session
1:00 p.m. Workshop Ends